Sunday, November 29, 2009

Seam Ripper Tip/Trick/Tutorial

I guess I could say I didn't know any better, but I didn't know the proper way to use a seam ripper until I started blogging. I certainly don't remember who or where I learned this from out there in blogland....I'm sorry I can't give credit where credit is due, but learning this has saved me considerable time in ripping out my seams.....Heaven knows I do a fair amount of this. In this 'episode' of ripping I sewed one fabric to the wrong side.....anyway....you take your ripper and pluck through about every 5 to 8 stitches like shown.

Then you flip this over to the other side...grab the thread at the end on this side and pull gently and viola!!! Easy peasy!! I'm sure most of you already know this trick, but as I was ripping this out a moment ago I was thinking maybe there was someone else out there who didn't!


When I was growing up and learned to sew....this was our 'weapon' of choice for seam ripping!!!.....LOL....does anyone else remember this?

Hope everyone had a wonderful Thanksgiving!!!
Posted by Picasa

30 comments:

  1. I didn't know you could go that far apart on the stitches...but ya know, I so seldom need to use a ripper. ha ha...I crack myself up.
    When I learned to sew Grandma seemed to do all the ripping for me. I have no idea what she was using anymore...

    ReplyDelete
  2. Oh yes!! I sure do remember the razor blade era.. my mom use to rip a lot of old clothing up to remake something and I would sit and hold one end of the fabric while she did the ripping.
    I did know about snipping threads every so often but didn't know about flipping to the back side to remove.. I always tugged the fabric apart till I could catch the thread.. I'll have to try your method.. sounds easier thx
    BTW did ya get all that cotton harvested?

    ReplyDelete
  3. Nice to have you back blogging. Hope everything has been okay for you.

    I have always used a seam ripper. I always keep a razor blade in my sewing drawer. There are times when the ripper just doesn't "cut" it. (laughing at my own pun - it wasn't meant to be one when I first wrote it - sorry)

    Another hint that I learned by accident just a couple of years ago when I misplaced my old seam ripper. Buy a new seam ripper once in a while. Unless someone knows how to sharpen an old one? I had no idea my old one was so dull.

    ReplyDelete
  4. Wow! An old seam ripper.I always lose mine!! As we sew.........so shall we RIP!! Have missed your blogs lately....hope you are well! Happy belated turkey!! Gail

    ReplyDelete
  5. I never used a razor, but I also didn't know there were "rules" to using a seam ripper. thanks!

    ReplyDelete
  6. I'm so glad they invented the seam ripper otherwise I may have used the razor blade to slit my wrists on one or two of my projects!;o)
    Thanks for the helpful tip! I didn't know this!
    Paulette

    ReplyDelete
  7. i did know that trick. depending on the stitch size and tension you can sometimes clip further apart. i don't remember using the blade. but i remember pulling apart enough to get my scissor point in there. thanks for sharing!

    ReplyDelete
  8. That's a cool tip. I usually just run it down in between the fabrics. Who knew I was doing it all wrong (and so is my mom who showed me to do it that way)? :)

    ReplyDelete
  9. Oh I do remember the razor blades for ripping - and for sometimes cutting myself. OUch.

    I do the seam ripper both ways - which ever seems to suit whatever it is that I'm ripping. I like ripping by running it down the straight seams between the two layers, much faster that way - but for curves I prefer the skipping stitches method - both owrk for me.
    Good tutorial for the skipping method.

    ReplyDelete
  10. no old enough to have used razors thankgoodness........I would have had holes cut in the fabrics I am sure
    the best quick unpickers are the cloer ones.........they are so sharp I love them and won't buy anything else..........

    ReplyDelete
  11. How fun, a razor! (0kay, I'm being facetious) I bet you were pretty proficient with it, ha?

    ReplyDelete
  12. Here is one person that you have taught something to today. I have never seen this trick and I sure take out a lot of stitches. In fact I was earlier today and I wish I had read this before. Thanks

    ReplyDelete
  13. What an essential tutorial - I'm a pull apart and snip but this looks so much easier - and fewer tiny threads to gather - the ladies have added a few good tips in the comments as well... especially about using a sharp seam ripper!

    "If it's worth doing, it's worth doing well" (and re-doing) lol

    ReplyDelete
  14. Hia Belinda, lovely tip. I finally got the quilt back sewn and photographed today for you. I was waiting on getting some 505 before pinning.

    ReplyDelete
  15. I'm wondering ... when you are trying to cut stitches IN the seam, is the ball on the ripper supposed to be up or down? See, we start to forget things after uhhh Senior Years!

    Personally, I use my small rotary cutter. Have NEVER had an accident yet. 8-))

    ReplyDelete
  16. I unpick the same way, Belinda - never did use a razor blade though - too scarey!
    Hugs - Lurline

    ReplyDelete
  17. I do the same method as you but cut threads a little closer together, about 4 stitches, then pull from the other side. I also got the idea from a blogger to replace my seam ripper---it wasn't until I really thought about it that I realized my current one was 7 years old! I got myself an ergnomic one that is kind of rubberized and it doesn't roll away from me, go figure :)

    ReplyDelete
  18. That's the method I use but I've never used a razor blade. I have tried a rotary cutter , same thing I suppose but it makes me nervous so I abandoned that idea.

    ReplyDelete
  19. Great tutorial, Belinda! I knew about that, just learned a few years ago. It's so much easier! And yeah, a new seam ripper will make your life easier. I bought 2 last time!

    I remember the razor blade. It was too scary for me! I knew there would be blood...guess who's?? Great incentive to be accurate the first time, huh?

    ReplyDelete
  20. I have a friend who uses her rotary cutter as a seam ripper, YIKES!!

    ReplyDelete
  21. I did not know the flipping-over part, so thanks! I'm also thankful I missed the razor-blade era.

    ReplyDelete
  22. Welcome back. To follow up on your tip, take blue painters tape to pick up the "little" threads that stay in the fabric. Makes for fast removal! Hope you had a nice Thanksgiving.

    ReplyDelete
  23. We always learn from each other. I sewed with my mom as a girl. And she liked things perfect. I was well acquainted with the ripper as tears used to go along with it from time to time. And she even insisted I use the seam ripper correctly! The nerve!!! oh how I miss her

    ReplyDelete
  24. Oh boy I am glad someone invented the seam rippers we have now. I would probably have blood all over the place if I had to use a razor blade. lol

    ReplyDelete
  25. I've used the seam ripper method "often" but I really love to use my rotary cutter to rip!!!!

    ReplyDelete
  26. The seam ripper and I are know each other well.

    ReplyDelete
  27. All I have every used is a razor blade. The only sewing teaching I got was 'home ec' class in 8th grade. 40 yrs or so ago.

    ReplyDelete
  28. REMEMBER, how could I forget!! I grew up using a razor as a ripper. I am sure glad we dont have to so it that way now. LOL

    ReplyDelete
  29. i truly adore all your posting style, very useful.
    don't quit and also keep posting considering the fact that it just worth to follow it,
    looking forward to look at even more of your articles, enjoy your day ;)

    ReplyDelete

**THANK YOU BUT, PLEASE DO NOT TAG * OR * AWARD * ME **